Cormach CM 1200 BB, Руководство по эксплуатации и обслуживанию

Страница: 40 / 49

38
User manual CM 1200 BB
MAINTENANCE
CAUTION
The “Spare parts” handbook does not authorise
users to carry out work on the machine with the
exception of those operations expressly descri-
bed in the user manual. It only enables users
to provide the technical assistance service with
precise information in order to minimise delays.
WARNING
CORMACH declines all liability for claims de-
riving from the use of non-original spare parts
or accessories.
CAUTION
Any operation intended to modify the setting
value of the relief valves or pressure limiter is
forbidden.
The manufacturer declines all liability for dama-
ge resulting from tampering with these valves.
WARNING
Before adjusting or servicing the machine,
disconnect the electricity and compressed air
supplies and make sure that all moving parts
are suitably immobilised.
CAUTION
Do not remove or modify any parts of this
equipment except in the case of service ope-
rations.
DANGER
When the machine is disconnected from the air
supply system, the devices marked with the war-
ning sign shown above may remain pressurised.
- The relubricator is equipped with
a semiautomatic condensation drain device. This
device operates automatically whenever the
compressed air supply to the machine is cut off.
Drain the condensation manually (push-button C,
fig.35) when the level exceeds the mark X, fig.35.
- Clean the top plate of the turntable every week:
remove any accumulated dirt and clean with
environmentally-friendly solvents.
84 User Manual S 100 PL
tube valve to let out the air left between the
tube and the tyre; this prevents deflation
and any possible damage to the tube.
- Inflate, taking utmost care that the pressu-
re shown on the Pressure gauge display 17
fig. 34 NEVER exceeds the pressure levels
recommended by the tyre producer.
- Fit the cap to the valve to protect its in-
ternal mechanism from dust and ensure
an airtight seal.
- Remove and unload the wheel as de-
scribed in steps 11-12 of the “TYRE
MOUNTING” section.
34
1
22
17
14
20
MAINTENANCE
CAUTION
The “Spare parts” handbook does not
authorise users to carry out work on the
machine with the exception of those ope-
rations expressly described in the user
manual. It only enables users to provide the
technical assistance service with precise
information in order to minimise delays.
WARNING
SICE declines all liability for claims de-
riving from the use of non-original spare
parts or accessories.
CAUTION
Any operation intended to modify the set-
ting value of the relief valves or pressure
limiter is forbidden.
The manufacturer declines all liability for
damage resulting from tampering with
these valves.
WARNING
Before adjusting or servicing the machine,
disconnect the electricity and compressed
air supplies and make sure that all moving
parts are suitably immobilised.
CAUTION
Do not remove or modify any parts of this
equipment except in the case of service
operations.
DANGER
When the machine is disconnected from
the air supply system, the devices marked
with the warning sign shown above may
remain pressurised.
- The relubricator is equip-
ped with a semiautomatic condensation