Cormach CM 1200 BB, Руководство по эксплуатации и обслуживанию

Страница: 43 / 49

User Manual CM 1200 BB
41
Precautions for the use of oil
- Avoid contact with the skin.
- Do not allow oil mists to form or spread in the
atmosphere.
- Observe the following elementary health pre-
cautions:
• protect against oil splashes (appropriate
clothing, protective guards on machines);
• wash frequently with soap and water; do not
use cleaners or solvents that can irritate your
skin or remove its natural protective oil;
• do not dry hands with dirty or greasy rags;
• change clothing if impregnated with oil, and
in any case at the end of every working shift;
• do not smoke or eat with greasy hands.
- Also adopt the following preventive and pro-
tective equipment:
• gloves resistant to mineral oils, with lining;
• goggles, in case of splashes;
• aprons resistant to mineral oils;
• screens to protect against oil splashes.
Mineral oil: first aid procedures
- Swallowing: seek medical attention, providing
the characteristics of the type of oil swallowed.
- Inhalation: in case of exposure to high concen-
trations of fumes or mists, take the affected per-
son to the open air and seek medical attention
immediately.
- Eyes: rinse with plenty of running water and
seek medical attention as soon as possible.
- Skin: wash with soap and water.
RECOMMENDED FIRE-
EXTINGUISHING DEVICES
For guidance on the most suitable type of extin-
guisher, refer to the table below:
Dry
materials
Flammable
liquids
Electrical
equipment
Water YES NO NO
Foam YES YES NO
Powder YES*
YES YES
CO
2
YES* YES YES
YES* Use only if more appropriate extinguishers are not
at hand or when the fire is small.
WARNING
This table contains general instructions inten-
ded to be used as guidelines for users. Contact
the manufacturer for details of the applications
of each type of extinguisher.
GLOSSARY
Air delivery regulator . Union allowing regulation
of the air flow.
Bead breaking . Operation in which the bead of
the tyre is detached from the edge of the rim.
Bead insertion . Operation which takes place during
inflation and ensures perfect centring between
the bead and the rim edge.
Bead pressing gripper . A tool intended for use
when mounting the top bead. It is fitted so that
it grips the shoulder of the rim and holds the tyre
top bead inside the drop centre. It is generally
used for mounting low profile tyres.
Tubeless Inflator. An inflation system which sim-
plifies inflating tubeless tyres.