68
Utilities
Corinex Wireless to Powerline AP
System Settings
Select the
Systems Settings
tab from the
Utilities
tabs. The following
screen will appear:
Fig. 3.26 System Settings
In the
Type in new Password
field you can change the management access
password to the Access Point. For that you will need to enter both the
current password in the
Type in current Password
field, and retype a new
password in the
Confirm new Password
field. You can also setup the login
timeout in the range of 1-99 minutes in the
Login Timeout
field. Default
password from the factory is "
password
"
.
Note
: Passwords are case sensitive. You can use all alphanumeric
characters (a-z, 0-9).
If required, you can setup also the time zone, along with daylight scheme
in the
Time Zone
and
Enable Daylight Saving
fields.
If you want to enable remote management of the Access Point, you can
arrange it by enabling all (Any IP address can remotely manage the Access
Point field on) or only selected IP address (Only this IP address can manage
the Access Point field remotely) to manage the Access Point. This is an
advanced feature and you should enable it only when you have changed
the Access Point access password from its default value to your own