TROUBLESHOOTING/REPAIRS
The troubleshooting and/or repairs shall be carried out only by the authorized dealer/distributor
or
by other
pneumatic tool specialists.
DIRECTIONAL EXHAUST DEFLECTOR
Loosen screw as shown. Adjust to desired exhaust direction and tighten screw.
QUICK JAM-RELEASING MAGAZINE
The stapler contains a “Quick Jam-Releasing Magazine” feature. The magazine is spring loaded to reduce
jamming. When a jam does occur, a quick release mechanism at the rear of the magazine allows the magazine
to move back, in order to clear the jam.
ALWAYS DISCONNECT AIR SUPPLY BEFORE CLEARING A JAMMED FASTENER.
If a jam does occur, locate the latch at the rear of magazine (FIG. 1). Pull down on the
latch to open (FIG. 2), and rotate it clockwise 1/4 turn (FIG. 3). Pull back on the latch
(FIG. 4). This will pull the magazine back to clear the jam. After removing the jammed fastener, push on the
latch, rotate it 1/4 turn counterclockwise and push up to close.
12
