E00/E01 Series Modular Piezo Controller User Manual
2
1.Safety
1.1 Design use
The E00/E01 system is designed for integrated user use and laboratory equipment.
Keep the surface of the E00/E01 system clean and dry. Do not operate in a humid or Large
electrostatic environment.
The E00/E01 system is used to drive capacitive loads (eg: piezoceramic actuators).
The E00/E01 system must not be used in other user manuals with the same name.
It is important to note that this E00/E01 system cannot be used to drive resistive or inductive
loads.
The E00/E01 system is available for both static and dynamic operating applications.
The available closed loop modes for the E00/E01 system include SGS, LVDT, and CAP sensors.
1.2 Safety Instructions
The E00/E01 system is based on nationally recognized safety standards and improper use may
result in personal injury or damage to the E00/E01 system. The operator is responsible for the
proper installation and operation of the E00/E01 system. The E00/E01 system is equipped with
function modules. If the modules are removed from the chassis, it may cause personal injury or
damage to the E00/E01 system.
Read the user manual in detail.
Please immediately remove any malfunctions and safety hazards caused by malfunctions.
Only authorized and qualified professional technicians can remove the module from the chassis.
When removing the module from the chassis, the power to the E00/E01 system should be
unplugged from the power outlet.
1.3 User Manual Notes
When using the E00/E01 system, the user manual and the E00/E01 system are integrated and
should be placed near the system for easy access.
If the user manual is missing or damaged, please contact our customer service department.
Please include all information given in the manufacturer's user manual, such as supplements or
technical notes,etc.
If your user manual is incomplete, you will miss a lot of important information, causing serious or
