E00/E01 Series Modular Piezo Controller User Manual
22
4.6 E07 HVPZT Power Amplifier Module
Danger! The E07 power amplifier module can output high voltages, and touching this high voltage
can cause serious or even fatal injuries.
Only qualified technicians can install, operate, maintain and clean the E07 Power Amplifier
Module!
4.6.1 Introduction to the front panel
Figure 12. E07.00 Power Amplifier Module
Identifier
Model
Function
POWER
LED green
The working status indication of the power
amplifier module:
Green light on: E07 operating normally;
Green light off: E00/E01 system is off
OVER
LED red
The power amplifier module does not have this
function
PZT OUTPUT
LEMO ZRA.0S.116.CLL Output voltage driving the piezoceramic actuator.
CONTROL INPUT
BNC
Control signal input terminal, the terminal and
external signal (Signal generator, analog signal
power, DA card, etc.) are connected
DC-OFFSET
10-turn Potentiometer
The input is manually adjusted and the signal is
superimposed on the “CONTORL INPUT” control
signal input.
