User and Maintenance Manual
Hydraulic brake ID 800
Model ID 800 (disc th. 8 mm)
Model ID 800 (disc th. 12.7 mm)
Date: 2014/07/01
Revision: 1.0
www.coremo.it
Page
8
of
13
Figure 1
2.
The brake can also be mounted on a bracket if the thickness of the disc is greater than 12.7
mm or 8 mm (Figure 2). The thickness of the bracket must be 12.7 mm or 8 mm less than the
thickness of the disc. In this case too, the brake is anchored using two class 12.9 M12 screws
with a tightening torque of 130 Nm. The two caliper halves must be separated obviously by
removing the screws C61407 (or the screws C61415 for ID 800 brake with thickness disc 8
mm).
Figure 2
3.
The fixed part of the machine which is to support the brake must be able to withstand a
tangential force of 22220 N.