User and Maintenance Manual
Hydraulic brake ID 800
Model ID 800 (disc th. 8 mm)
Model ID 800 (disc th. 12.7 mm)
Date: 2014/07/01
Revision: 1.0
www.coremo.it
Page
9
of
13
4.
The brake can be supplied on request complete with pipe fittings (K90345) where there is
already an air bleed (Figure 3). To bleed the air from the circuit after connecting the brake to
the power line using a Ø6 hose, loosen the clamping nut of the fitting (H0035) and pull out the
cap (H0034). After bleeding the circuit tighten the fitting (H0035).
Figure 3
5.
The brake also has another bleed as a standard feature. In this case connect the brake to the
power line using a 1/8” pipe fitting. To bleed the air loosen the cap (C62114). When the circuit
has been bled tighten the cap (Figure 4).
O
C
E
R
MO
C
O
M
E
A
Y
L
A
T
I
SA
O
G
S
A
Figure 4
Personnel assigned to these operations must take special care, working cautiously when
bleeding the circuit, wearing suitable PPE such as gloves, goggles and safety footwear
