User and Maintenance Manual
Failsafe hydraulic brake ID 2000N
Model ID 2000N-116
Date: 2014/06/27
Revision: 1.1
www.coremo.it
Page
23
of
25
Photo 42
Photo 43
8.
Connect the power line, power up the brake and insert the safety hook (C62257) in its seat
in the thruster which protrudes from the cover.
9.
Cut off the control pressure and disconnect the power line.
10.
Reinstall the brake on the machine.
11.
Reconnect the power line and power up the brake.
12.
Remove the safety hook (C62257) and bleed air from the circuit as described in point 5 of
section 7.
Figure 3 - Position of the cup springs
