Homepage
The CorDEX MONITIR PC Application is
intended for setup purposes both of a
standalone camera and also to aid PLC
Integration.
The Application is broken down into two
main methods of communication; Network
Discovery and Direct Connect.
Network
Discovery
Settings
Direct Connect
(USB)
Direct Connect
(Ethernet)
Network Discovery
Network Discover is intended to identify
all CorDEX MN4xxx cameras located on a
network. This is achieved by broadcasting a
message across the network, to which each
camera responds providing;
1. Instrument Type
– This refers to camera
type (Factory set)
2. Location
– This is a description,
uploaded to the camera during initial
installation/setup, that provides a
means of identifying where the camera
is located in a particular facility. (User
configurable)
3. Ip Address
– The IP Address of the
camera (User configurable)
4. Mac Address
– The Mac Address of the
camera (Factory set)
5. Serial Number
– The Serial Number of
the camera (Factory set)
To deploy Network Discovery from the
homepage, ensure the PC running MONITIR
is connected to the same network as the
MN4xxx cameras and click the Network
Discovery icon, the Network Discovery page
will appear and the user prompted to begin
the Discovery process.
Once complete, the window will be populated
with all the cameras which have responded to
the Network Discovery broadcast message.
Double clicking on a particular camera will
open the corresponding setup page, this is the
same page as Direct Connect Ethernet.
RUGGED
AUTHORITY
MONITIR Series Thermal Imaging Cameras
– User Manual
23
Document Reference MONITIRSERIESUM Rev. A
