11
(617417440)
FM359 7/19
Access 800
™
Series
Keypad Programming Instructions
Locks
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018
-2019
Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5
M801, M803, M804, M806 Programming
Enter a User Code and Card, Tag, FOB and RF FOB
99# Master Code or Supervisor Code*
Yellow LED blinks
50# (See Table Below)# (User Location 03-2000)#
Yellow LED blinks
User Code (1-6 digits)*
Yellow LED blinks quickly
User Code (1-6 digits)*
Yellow LED blinks slowly
Present Card, Tag, FOB or RF FOB
BEEP / Yellow LED blinks
*
Yellow LED blinks slowly
*
Yellow LED goes out
User Type Table:
Note 1: There is a time delay period between initially depressing the RF FOB
button and the actuation of the lock. In some cases the RF FOB will have to be
depressed (and held for 3 seconds) multiple times to successfully actuate the
lock.
Note 2: In the event that there are co-located RF Technology locks using
individual RF FOBs that are depressed simultaneously; the locks may not
actuate due to cross interference between the locks and the RF FOBs. The
“User” should repeatedly depress (and hold for 3 seconds) the RF FOB button
until actuation of the lock occurs.
Turn OFF Audible Beep verification on every Key Depression
99# Master Code*
Yellow LED blinks
30# 0# 0# (Off) (1# = On)
Yellow LED blinks
*
Yellow LED blinks quickly
*
Yellow LED blinks slowly
*
Yellow LED goes out
0
Passage User
1
Standard User
3
Lockout User
4
Extended Unlock User
5
One Time User
7
Emergency User
8
Communications Enable User
9
Panic User
