8
(617417440)
FM359 7/19
Access 800
™
Series
Locks
Keypad Programming Instructions
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018
-2019
Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5
M801, M803, M804, M806 Programming
To Change the Master Code
99# 1234*
Yellow LED blinks
50# 1# 01#
Yellow LED blinks
New Master Code*
Yellow LED blinks quickly
New Master Code*
Yellow LED blinks slowly
*
Yellow LED goes out
This example uses the Factory Default
1234*
, yours may differ.
It is strongly recommended not to use the factory default Master code.
Enter the Supervisor Code
99# Master Code*
Yellow LED blinks
50# 1# 02#
Yellow LED blinks
Supervisory (1-6 digits)*
Yellow LED blinks quickly
Supervisory (1-6 digits)*
Yellow LED blinks slowly
*
Yellow LED goes out
Enter A User Code
99# Master Code or Supervisor Code*
Yellow LED blinks
50# 1# (User Location 03-2000)#
Yellow LED blinks
User Code (1-6 digits)*
Yellow LED blinks quickly
User Code (1-6 digits)*
Yellow LED blinks slowly
*
Yellow LED goes out
Enter A Panic User Code
99# Master Code or Supervisor Code *
Yellow LED blinks
50# 9# (User Location 03-2000)#
Yellow LED blinks
User Code (1-6 digits)*
Yellow LED blinks quickly
User Code (1-6 digits)*
Yellow LED blinks slowly
*
Yellow LED goes out
Enter A Passage (Maintained) Code
99# Master Code or Supervisor Code*
Yellow LED blinks
50# 0# (User Location 03-2000)#
Yellow LED blinks
User Code (1-6 digits)*
Yellow LED blinks quickly
User Code (1-6 digits)*
Yellow LED blinks slowly
*
Yellow LED goes out
Note: The “Passage” user has precedence over all users except the “Panic” user. The
lock must toggled back into a locked state for other users to function.
