Revision 01
May 30, 1997
Section 363-718-102
PG-Flex FCS-718
PairGain Engineering - Plant Series
Page 27
8.7
Subscriber Lines.
Connect the subscriber lines to the wire-wrap terminations (Figure 9):
1
Wire-wrap CO switch subscriber line circuits to P1 and P3 termination points for system 1. Use
Table 14.
2
Wire-wrap CO switch subscriber line circuits to P2 and P4 termination points for system 2. Use
Table 15.
Figure 9. Installing the Subscriber Lines
8.8
Auxiliary Power Pairs.
When PG-Flex is used with a doubler, wire auxiliary power pairs to the
COT shelf (Figure 10) as follows:
1
Wire-wrap power pair #1 to PWR_OUT T1 (Tip1) and PWR_OUT R1 (Ring1) for system 1.
2
Wire-wrap power pair #2 to PWR_OUT T2 (Tip2) and PWR_OUT R2 (Ring2) for system 1.
3
Repeat steps 1 and 2 for system 2 when used with a doubler.
Figure 10. Wiring the Auxiliary Power Pairs
Содержание 150-1318-02
Страница 34: ......
