Copley Controls Serial Encoder, Руководство пользователя

Страница: 45 / 54

Copley Controls Encoder Guide Encoder Management
Copley Controls 45
ASCII Interface
Copley drives
support a command on CME 2’s ASCII interface that can be used to clear encoder
faults.
To clear a fault on a motor encoder, use the CME ASCII command enc clear.
To clear a fault on a load encoder, use the CME 2 ASCII command ldenc clear.
Upon success, these commands will return ' ok '. If an error occurs or the drive
’s firmware does not
support clearing latched faults for the specific type of encoder, an error response will be returned.
To enter a command using CME 2’s ASCII interface:
1
From the Main screen, choose Tools

ASCII Command Line to open the tool.
2
Enter the ASCII Command enc clear or Idenc clear in the Command field.
3
Press the Enter key to send the command to the drive. Observe the Response field. The
response should read ok .