COP Security INS-RED04, Руководство инженера

Страница: 8 / 103

7
Engineer Manual
INS-RED04 INS-RED08 INS-RED16
If you want to control PTZ cameras & speed domes from both the DVR and the
keyboard then both RS485 busses must be connected together.
RS485
RS485
Recommended cable is Cat 5.
Maximum cable run is recommended at 500 metres for each device.
Keyboard Setting
The keyboard must be set to Pelco D 2400 baud rate for it to communicate with the
DVR.
Set the DIP switch on the keyboard.
PTZ Camera Setting
The PTZ cameras must be set to Pelco D 2400.
Each PTZ camera must be set with an individual ID number.
See PTZ camera instructions for details on changing these settings.
DVR Setting
The DVR will automatically work on Pelco D 2400 for keyboard communication.
For multiple DVR configurations you need to set the DVR ID, see page 37 for details.
The settings for the PTZ communication protocol must match PTZ camera setting.
See page 45 for details of setting the DVR for PTZ use.
Connecting Keyboard and PTZ