12. DISPLAY Mode
There are three kind of display modes such as single (as full), QUAD, sequential mode
regardless recording mode. When there are motion detection or alarm triggering, the
video channel which motion is detected or alarm is triggered would be display on monitor
during 30 Seconds. After it pass 30 Seconds, your DVR would display previous display
mode such as full, QUAD or sequential picture.
11-20-2004 23:10
11-20-2004 22:00
2
11-20-2004 11:20
TIME
TIME
11-20-2004 10:33
LIST TYPE
11-20-2004 10:33
1
SEARCH LIST
2/ 2
NOTE:
1. If
PLAY
button be pressed two times successively, latest recorded file could be
playbacked soon.
2. The example for searching recorded files by
TIME.
Search list by
TIME
can be selected from
ALL/ TIME/ MANUAL/ ALARM/ MOTION/
SCHEDULE
using
DOWN
or
UP
button.
After moving 11-20-2004 date area using LEFT or RIGHT Button (and then related date
character would be turned into bold character), the date which want to search can be
selected by using
DOWN
or
UP
button. Then recorded files just after selected date,
time (ex,
11-20-2004 10:33)
would be listed as bellows. To playback a recorded file
from listed files, press ENTER button to move listed files. And then press
PLAY button
(
▶
) for playback after selecting the recorded file using
DOWN
or
UP
button.
When your DVR is in recording, playback and network mode,
are displayed
on left top corner of monitor. But it is on MENU Mode,
are temporarily
disappeared as upper figure.
▶
▶
ALARM SETUP
4
SYSTEM SETUP
1
HDD INFORMATION
9
ARCHIVING
8
NETWORK SETUP
7
WEEKLY SCHEDULE
6
MOTION SETUP
5
RECORDING SETUP
3
DISPLAY SETUP
2
MAIN MENU
12: 03: 2004 06: 26: 23 PM
PDF created with pdfFactory trial version
www.pdffactory.com
