To access ALARM SETUP, press
ENTER
when ALARM SETUP in MAIN MENU using
DOWN
or
UP
is highlighted with blue color. The menu above will appear on monitor.
1) FRAME RATE:
60, 30, 15, 10, 5, 1, 0.5 IPS.(NTSC)
Your DVR support several frame rates from 0.5 to 60 Image per seconds for NTSC
from 0.5 to 50 IPS for PAL. It can be selected using
LEFT
or
RIGHT
button.
2) DURATION:
It define recording duration after motion is detected. This DVR support 10 sec, 30 sec,
1,2,3,4,5,6,7,8,9,10,20,30,40,50,60 minutes. It can be selected using
LEFT
or
RIGHT
button.
3) SENSOR TYPE:
NONE/ N.O/ N.C
Your DVR can select the input type for external alarm inputs which usually has normal
open or normal close using
LEFT
or
RIGHT
button.
4) ALARM INPUT (Relay TRIGGER Out):
Your DVR support both dry open and dry contact through relay output port 1 to port 4.
It can be selected using
LEFT
or
RIGHT
button. Trigger Output 1 to 4 corresponding to
alarm input from 01 to 16 can separately be designated. For example, trigger output
for alarm input 01 can be designated as “ DISABLE”(when trigger output isn’t needed).
Trigger output for alarm input 02 can be designated as “trigger output 1”. Trigger output
for alarm input 10 can be designated as “trigger output 3”. Trigger output for alarm
input 16 can be designated as “trigger output 4”.
5) BUZZER ALERT: DISABLE/ ENABLE
If external alarm sensor(s) be triggered, beep sound from buzzer by
BUZZER ALERT
with
ENABLE
would be occurred during two seconds.
5. ALARM SETUP
: DISABLE
BUZZER ALERT
5
: 01 to 16
: DISABLE, 1 to 4
ALARM INPUT
TRIGGER OUT
4
: NONE/ N.O/ N.C
: 3 MIN
: 60/ IPS
FRAME RATE
1
SENSOR TYPE
3
DURATION
2
ALARM SETUP
▲ ▼
◀ ▶
EXIT
ENTER
4
PDF created with pdfFactory trial version
www.pdffactory.com
