High Speed Dome Camera Introduction Manual
34
■
Group Setup
z
Edit Group
z
Edit Label
<MOTION SETUP>
→
<GROUP SETUP>
z
Group Number [1~8]
Selects Group number to edit.If a selected Group number is
not defined,"UNDEFINED" will be displayed under selected
Group number.
z
Clear Group [CANCEL/OK]
Deletes data in current Group
z
Edit Group
1
、
Press OPEN key to start Tour setup.
2
、
Note that MAX. 16 “Presets” are allowed in a Tour.
Move cursor up/down and press OPEN key to set up.
3
、
Set up Action, Dwell time and Speed is optional. Time
value from displayed in reverse. Move cursor Left/Right
to select items and 3 sec To 60 sec. Speed value from
30 to 360. Move cursor Left/Right to select items and
move cursor Up/Down to change each value.
z
Edit Label
Edits Label to show on monitor when preset runs MAX. 10
alphabets are allowed. Enter edit label, “?” cursor will be
displayed on the screen, using left/right of joystick to select
character, and using up/down to move cursor, After
inputting, press “OPEN” key to save and exit the setting.
z
Run Group Run current Group
