High Speed Dome Camera Introduction Manual
23
▌▌
IR Setup
The user can open and close the IR LED manually and set up
the IR LED work mode under this OSD mean. control the
joystick left or right to set the IR mode.
z
IR Mode
[AUTO/TIME/CAM/NEAR/FAR/ON/OFF]
To select the IR LED mode such as
AUTO/TIME/CAM/NEAR/FAR/ON/OFF
.
1.AUTO
：
Infrared light is automatically turned
on or off according to the brightness
of the light.
2.Time
：
Infrared light setting to open according
to the time.
3.Camera
：
Infrared light turned on or off which
is synchronized with the camera and
transferred from day and night mode.
4.NEAR: Forced IR light to the near beam mode.
5.FAR: Forced IR light to the far beam mode.
6.ON: Infrared light mode forced open.
7.OFF: Infrared light mode forced close.
z
Output Power [00~09]
To select the output power of infrared.
z
Testing Time [01S~08S]
To select the testing time of infrared when started.
z
Illumination on [01L~09L]
To select the starting illumination of infrared when it was
AUTO mode.
z
IR Switch Zoom [01X~18X]
To select the times of zoom from the high beam to low
beam each other.
z
Ambient light [06L]
To test the light of environment automatically.
