High Speed Dome Camera Introduction Manual
33
■
Pattern Setup
z
Edit Pattern
z
Edit Label
<DOME SETUP>
→
<PATTERN SETUP>
z
Pattern Number [1~4]
Selects Pattern number to edit.If a selected pattern number
is not defined,"UNDEFINED" will be displayed under
selected pattern number.
z
Clear Pattern
[CANCEL/OK]
Deletes data in current pattern.
z
Edit Pattern
Move the cursor here and then Move the cursor here and
then joystick to the right to enter.To start pattern recording,
Move camera with joystick of controller or run preset
function to memorize the path (mostly curve path) in a
selected pattern. Maximum 500 commands can be stored in
a pattern
z
Edit Label
Edits Label to show on monitor when preset runs MAX. 10
alphabets are allowed. Enter edit label, “?” cursor will be
displayed on the screen, using left/right of joystick to select
character, and using up/down to move cursor, After
inputting, press “OPEN” key to save and exit the setting.
z
Run Pattern Run current Pattern
