Installing the IPC-8000
Installation Instructions: IPC-8000
P/N P10-00059 Rev A
I
N
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
8
Follow the steps below to install and connect the AC Power cable.
1.
Ensure the AC power source is off.
2.
Route the external AC power cable into the IPC-8000 enclosure. Allow ample slack
in the cable to properly route and terminate all wires to the AC Terminal Board.
3.
Terminate the external AC power cord to TB1 inside of the enclosure as shown in
Figure 4, as follows:
Line
Neutral
Ground
4.
Connect the other end of the AC power cable to an AC power source.
BEFORE CONNECTING AC POWER, ENSURE THE POWER SWITCH IS IN
THE OFF POSITION AND THE AC POWER SOURCE HAS BEEN POWERED
DOWN. FAILURE TO TURN OFF THE POWER MAY RESULT IN SHOCK TO
PERSONNEL AND POSSIBLE EQUIPMENT DAMAGE.
