Cooper Notification IPC-8000, Руководство по установке

Страница: 2 / 17

Introduction
Installation Instructions: IPC-8000
P/N P10-00059 Rev A
I
N
S
T
A
L
L
A
T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
2
3. Introduction
The IPC-8000 is an IP based node utilizing inputs, and outputs. The IPC-8000 sends and
receives IP streamed audio to end nodes and provides inputs, outputs, and serial RS-232
connections to external devices. Additionally, the IPC-8000 has the ability to interface with
the (optional) RADIO-900M to enable wireless IP functionality within the network.
It is recommended that an (optional) UPS-901 be connected to the IPC-8000 to provide
battery backup during an AC power failure for all applications except the ACU-8411
configuration.
4. Requirements

IPC-8000 Enclosure, including:

Enclosure Assembly and associated hardware

IP Communicator (IPC); pre-installed in the IPC-8000 enclosure

IPC to TB1 AC Power Cable Assembly, PN S40-00267

IPC to TB2 Cable Assembly, PN S40-00299

Additional required equipment and hardware for installation of the IPC-8000 shall be
determined by the Installer based on the placement of the Unit and the construction of
the wall material.

Appropriate Installation Instructions and Manuals as listed in Table 1.

(Optional) UPS-901 Battery Backup

(Optional) RADIO-900M

(Optional) ACU-8411
Table 1 Installation Instructions and Manuals
DESCRIPTION PART NUMBER (PN)
IPC-8000 Installation Instructions P10-00059
IPC Installation Instructions P10-00063
UPS-901 Installation Instructions P40-00025
ACU-8411 Installation Instructions P10-00064
RADIO-900M Installation Instructions P01-04941
IPC Configuration Tool P01-10012
WAVES 8 Administration Manual P01-10010
Optional configurations:

When the IPC-8000 is configured with the optional RADIO-900M, the system
must be configured with either a UPS-901 or an external Backup Generator.

When the IPC-8000 is configured in an ACU-8411 configuration, the
maximum distance between the IPC-8000 enclosure and the ACU-8411 is 24
ft. (7.32 m); a 25 ft. cable is provided with the ACU-8411.

When the IPC-8000 is configured in an ACU-8411 configuration, DC backup
power for the IPC in the IPC-8000 is supplied from the SP40S; therefore an
optional UPS is not necessary.