Ɣ
Ɣ
Ɣ
Introduction for buttons on
remote controller
Pressing this button can set fan speed circularly
as: auto (AUTO), low( ), medium( ), high( ).
ON/OFF
button
Press this button to turn on the unit. Press this button
again to turn off the unit.
button
Press this button to select your required operation
mode.
When selecting heating mode, the air condition-
er operates under heat mode. Press
Ÿ
or "
ź
"
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
button to adjust fan blowing angle. (Cooling only
unit won't receive heating mode signal. If setting
heat mode with remote controller, press ON/OFF
button can't start up the unit).
button
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
AUTO COOL
DRY
FAN
HEAT
For preventing cold air, after starting up heating
mode, indoor unit will delay 1~5 minutes to blow air
(actual delay time is depend on indoor ambient
temperature).
Set temperature range from remote controller:
16~30°C (61-86°F);
Fan speed: auto, low speed, medium speed, high
speed.
This indicator is not available for some models.
This is a general use remote controller, it could be
used for the air conditioners with multifunction; For
some function, which the model doesn't have, if
press the corresponding button on the remote
controller that the unit will keep the original running
status.
After putting through the power, the air conditioner
will give out a sound. Power indicator " " is ON
(red indicator, the colour is different for different
models). After that, you can operate the air condition-
er by using remote controller.
Under on status, pressing the button on the remote
controller, the signal icon " " on the display of
remote controller will blink once and the air condition-
er will give out a "di" sound, which means the signal
has been sent to the air conditioner.
When selecting auto mode, air conditioner will
operate automatically according to ex-factory
setting. Set temperature can't be adjusted and
will not be displayed as well. Press "FAN" button
can adjust fan speed. Press " " / " " button
can adjust fan blowing angle.
After selecting cool mode, air conditioner will
operate under cool mode. Press "
Ÿ
" or "
ź
"
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
button to adjust fan blowing angle.
When selecting dry mode, the air conditioner
operates at low speed under dry mode. Under
dry mode, fan speed can't be adjusted. Press
" " / " " button to adjust fan blowing angle.
When selecting fan mode, the air conditioner will
only blow fan, no cooling and no heating. All
indicators are OFF. Press "FAN" button to adjust
fan speed. Press " " / " " button to adjust fan
blowing angle.
FAN
Auto
Ɣ
Ɣ
Having set X-FAN function on: After turning off the
Under AUTO speed, air conditioner will select proper
fan speed automatically according to ex-factory
setting.
It's Low fan speed under Dry mode.
X-FAN function Hold fan speed button for 2s in COOL
or DRY mode, the icon " " is displayed and the
indoor fan will continue operation for a few minutes in
order to dry the indoor unit even though you have
turned off the unit. After energization, X-FAN OFF is
defaulted. X-FAN is not available in AUTO, FAN or
HEAT mode. This function indicates that moisture on
evaporator of indoor unit will be blowed after the unit
is stopped to avoid mould.
Ɣ
NOTE
NOTE
NOTE
unit by pressing ON/OFF button indoor fan will
continue running for a few minutes. at low speed. In
this period, Hold fan speed button for 2s to stop
indoor fan directly.
Having set X-FAN function off: After turning off the
unit by pressing ON/OFF button, the complete unit
will be off directly.
MODE
