background image

 Revised: 23/08/2012 

 

Printed 

19

Printed: 20/03/2013 

W

ARRANTY 

 

DESIGNATION  OF  WARRANTOR.    This  warranty  is  extended  by  Shamic  Sheetmetal  (Aust)  Pty.  Ltd  with  respect  to 
Coonara gas heaters  
PRODUCT.  This Coonara gas heater is comprised of the heater proper (including components and firebox), fan assembly, 
speed control switch, electrical components, gas valves, seals and moving parts.  Except where specifically excluded from 
coverage hereunder, this warranty covers all components designed. 
See exclusions and qualifications below for further information on product coverage. 
WARRANTY: 

1)

 

Shamic Sheetmetal (Aust) Pty. Ltd warrants the firebox and the heat exchanger to be free of defects in materials 
and workmanship of a period of five (5) years from the date of purchase. 

2)

 

Shamic Sheetmetal (Aust.) Pty.Ltd. warrants that all other components of the unit to be free of defects in material 
and workmanship for a period of two (2) years from date of purchase, excluding door glass and decorative logs. 

3)

 

If  this  Coonara  heater  is  found  to  be  defective  in  material  or  workmanship  Shamic  will  repair  or  replace  such 
defects in the Coonara heater at Shamic’s option in accordance with Coonara’s warranty policy during the period 
on this warranty. If the defect is found not to meet the Consumer Guarantee requirements and constitutes a major 
failure, the purchaser may be able to choose to repair or replace the defective heater or part or obtain a refund. 

4)

 

Exclusions and qualifications.  This warranty is subject to the following exclusions and qualifications. 

a)

 

This  warranty  extends  only  to  the  original  consumer  purchaser,  who  has  purchased  the  heater  from  an 
authorised Coonara dealer. 

b)

 

This warranty does not apply to, and Coonara assumes no responsibility for any damages that result due 
to,  installation  or  operation  of  the  heater  not  in  accordance  with  both  the  installation  and  operation 
instructions furnished with the unit. 

c)

 

This  warranty  does  not  apply  to  any  heater  which  has  been  modified  or  damaged  in  shipping  or  by 
improper handling, improper operation, abuse, misuse, accident or unworkmanlike repairs. 

d)

 

Shamic Sheetmetal (Aust.) Pty.Ltd. does not warrant the structural performance of the heater when fuel 
products  other  than  the  specified  gas  fuels  are  used.    Flammable  liquid  fuels  are  explosive  and  should 
never be used in this product. 

e)

 

Shamic  Sheetmetal  (Aust.)  Pty.Ltd.  expressly  excludes  any  liability  hereunder  for  defects  or  damage 
caused  by  the  installation  or  of  any  components  not  expressly  authorised  and  approved  by  Shamic.    
Shamic  further  assumes  no  liability  for  defects  or  damage  caused  by  any  modification  not  expressly 
authorised  and  approved  by  Shamic.    Unauthorised  components  or  modifications  could  create  a  fire 
hazard by altering the safety design of the heater. 

f)

 

Building  Codes.    Since  building  code  requirements  vary,  users  should  determine  in  advance  whether 
there  are  any  building  code  restrictions  on  the  installation  or  use  of  the  heater.    Shamic  makes  no 
representation  of  warranty  regarding  building  code  compliance  and  shall  not  be  responsible  for 
compliance therewith. 

g)

 

Shamic  will  only  accept  claims  under  this  warranty  in  strict  accordance  with  the  conditions  set  out 
below. 

5)

 

Shamic  Sheetmetal  (Aust.)  Pty.Ltd.  shall  not  be  liable  for  any  breakages  of  glass  and  log  components,  transit 
damage or, where it can be shown that the consumer guarantee obligations as the manufacturer have been met, for 
any  claim  by  any  person  for  incidental  or  consequential  damages  caused  by  defects  in  the  Coonara  heater.  
Whether  such  damage  occurs  or  is  discovered  before  or  after  replacement  or  repair,  and  whether  or  not  such 
damage is caused by Coonara negligence.  Normal wear and tear items such as routine surface maintenance, seals 
and door glass are also excluded from this warranty. 

6)

 

Shamic goods come with guarantees that cannot be excluded under Australian Consumer Law. The purchaser is 
entitled to a replacement or a refund for a major failure and compensation for any reasonably foreseeable loss or 
damage. The purchaser is also entitled to have the goods repaired or replaced if the goods fail to be of acceptable 
quality and the failure does not amount to a major failure. 

7)

 

This warranty applies only to units purchased from an authorised dealer and the duration of this implied warranty, 
including merchantability, applicable to this Coonara heater is limited to the duration of the foregoing warranty. 

8)

 

Before Shamic Sheetmetal (Aust.) Pty.Ltd. will recognise or accept a claim under this warranty, you must provide 
proof of purchase.  On purchase of the heater, despatch your warranty card to Shamic Sheetmetal (Aust.) Pty.Ltd. 

9)

 

Your  authorised  dealer  must  be  notified  of  any  defect  in  the  heater,  for  investigation  of  the  claim.  In  the  event 
where a remedy is necessary and the claims under warranty are accepted, the purchaser may be required to return 
the goods to the authorised dealer for repair, replacement or refund. 

 

 

 
 
 
 
 

Содержание CONSOLE






















Отзывы: