Revised: 15/02/16
31/03/2016
26
WARRANTY
DESIGNATION OF WARRANTOR. This warranty is extended by Shamic Sheetmetal (Aust) Pty. Ltd
with respect to Coonara gas heaters.
PRODUCT. This Coonara Gas heater is comprised of the heater proper (including components and
firebox), fan assembly, speed control switch, electrical components, gas valves, seals and moving parts.
Except where specifically excluded from coverage hereunder, this warranty covers all components
designed.
See exclusions and qualifications below for further information on product coverage.
WARRANTY:
1)
Shamic Sheetmetal (Aust) Pty. Ltd, warrants the firebox and the heat exchanger to be free of
defects in materials and workmanship of a period of five (5) years from the date of purchase.
2)
Shamic Sheetmetal (Aust.) Pty.Ltd., warrants that all other components of the unit to be free of
defects in material and workmanship for a period of two (2) years from date of purchase,
excluding door glass and decorative logs.
3)
If this Coonara heater is found to be defective in material or workmanship Shamic will repair or
replace such defects in the Coonara heater at Shamic’s option in accordance with Coonara’s
warranty policy during the period on this warranty. If the defect is found not to meet the
Consumer Guarantee requirements and constitutes a major failure, the purchaser may be able to
choose to repair or replace the defective heater or part or obtain a refund.
4)
Exclusions and qualifications. This warranty is subject to the following exclusions and
qualifications.
a)
This warranty extends only to the original consumer purchaser, who has purchased the
heater from an authorised Coonara dealer.
b)
This warranty does not apply to, and Coonara assumes no responsibility for any damages
that result due to, installation or operation of the heater not in accordance with both the
installation and operation instructions furnished with the unit.
c)
This warranty does not apply to any heater which has been modified or damaged in
shipping or by improper handling, improper operation, abuse, misuse, accident or
unworkmanlike repairs.
d)
Shamic Sheetmetal (Aust.) Pty.Ltd. does not warrant the structural performance of the
heater when fuel products other than the specified gas fuels are used. Flammable liquid
fuels are explosive and should never be used in this product.
e)
Shamic Sheetmetal (Aust.) Pty.Ltd. expressly excludes any liability hereunder for
defects or damage caused by the installation or of any components not expressly
authorised and approved by Shamic. Shamic further assumes no liability for defects or
damage caused by any modification not expressly authorised and approved by Shamic.
Unauthorised components or modifications could create a fire hazard by altering the
safety design of the heater.
f)
Building Codes. Since building code requirements vary, users should determine in
advance whether there are any building code restrictions on the installation or use of the
heater. Shamic makes no representation of warranty regarding building code compliance
and shall not be responsible for compliance therewith.
g)
Shamic will only accept claims under this warranty in strict accordance with the
conditions set out below.
5)
Shamic Sheetmetal (Aust.) Pty.Ltd. shall not be liable for any breakages of glass and log
components, transit damage or, where it can be shown that the consumer guarantee obligations
as the manufacturer have been met, for any claim by any person for incidental or consequential
damages caused by defects in the Coonara heater. Whether such damage occurs or is discovered
before or after replacement or repair, and whether or not such damage is caused by Coonara
negligence. Normal wear and tear items such as routine surface maintenance, seals and door
glass are also excluded from this warranty.
Содержание Barossa
