UMD V3 Installation Manual - Remote Control
13 November 2018
Page
20
of
39
Post Installation:
Once the physical installation of the unit is complete and the UMD is powered on contact CoolTrax Support
staff so that they can check that the unit is reporting as expected.
On contact provide the following Installation Details (via phone or fax the completed Installer Template
provided by CoolTrax):
1.
The Customer Name
2.
The Fleet ID of the Trailer
3.
The UMD ID (located on the front of the UMD
–
typically UCXXXX
4.
The Fridge Model
5.
The Sensor location with Sensor ID
–
if fitted
6.
The installer name and contact details
–
mobile phone number to call once the unit has been tested
Please ensure that CoolTrax staff confirms that the unit is reporting data as expected
BEFORE
the trailer leaves
the installers premises. Cooltrax will not be liable for costs incurred through the asset being recalled for
validation at a later time.
CoolTrax staff will ask you to conduct a number of fridge operations as part of the Installation Check to make
sure the unit fridge interface is correctly installed and configured.
•
Power the fridge unit on and off to check the Fridge Interface is functioning as expected
•
Change Set Point Temperature
•
Open and Close the Rear Door to test Door Tag if fitted.
•
Send some Remote Commands to ensure the Interface is working correctly
•
Switch to Maintenance Mode to ensure that the Maintenance Box is connected correctly
CoolTrax Support Contacts:
Support
–
(613) 9686 6011
Email: [email protected]
