Page 1 / 2
IMPORTANT:
Ensure that all perforated slots sit firmly on
the notches after tightening up the dome nuts.
356mm
344mm
380mm
Fixed Plant Bracket
MBR-CP56-FPB
Mobile Plant Bracket (Optional)
MBR-CP56-MPB
364mm
145mm 145mm
84mm
208mm
CP56 Luminaire
364mm
150mm
208mm
80mm
290mm
Page 1 / 2
aus.
1300 287 533 •
intl.
+613 8681 3633 • www.coolon.com.au
Product must be installed by a suitably qualified person. All documentation is subject to change without notice. Refer to our website for the latest information.
www.coolon.com.au
CP56 INDUSTRIAL LED
MANUAL
EDITION 1.8
CP56-ELV
24VDC IN
Length = 2m
Wiring Diagram
Red (Positive)
White (0 – 10V Dimming)
Black (Negative)
Install arm locks onto protruding studs on both sides of the
housing as shown below.
Step 1
Apply force
to fit over
protruding
studs
Apply necessary force to open the bracket in order to fit over the
properly positioned arm locks.
Step 2
MOUNTING BRACKET INSTALLATION
Align perforated slots in mounting bracket against corresponding
notches in the arm locks, then tighten the nut. Ensure that all the
perforated slots sit firmly on the notches after tightening up the
nuts. Recommended tightening torque is 40 Nm.
Step 3
We recommend Loctite® 243™ retaining compound
(not included) to secure the dome nut.
Voltage In
21 – 34VDC
Power
270W @24VDC
IP/IK Rating
IP66 / IK09
Operating Temperature
-20°C ≤ T
amb
≤ 50°C
Electrical Characteristics
