Chapter 8. Firmware Upgrade
49
Upgrade Assessment Fail
When the upgrade assessments fail (e.g. when no USB storage device
is connected or USB drive does not have a firmware upgrade file, etc.),
the GO LIVE button and the last LED of Volume Meter LEDs will blink
every 0.3 seconds.
Press the GO LIVE button to return the unit to normal operation and
try again from step 1.
Upgrade Fail
If firmware upgrade fails during the firmware upgrade (e.g.
disconnected USB storage device or power, etc.), the last LED of
Volume Meter LEDs will blink every 0.3 seconds.
The unit will reboot after some time and try to upgrade the firmware
If it fails again, it will reboot and try again.
When this happens, it is likely that the upgrade file is corrupted. We
recommend:
1. Unplug the power and the USB storage device from your StreamEnjin.
2. Retrieve the firmware file again and recheck the USB preparation
process (Download Requirements).
3. Replug your USB storage device.
4. Replug the power. The unit will start the upgrade process after
If you are still unable to upgrade the unit’s firmware, please contact
your dealer.
0.3s
0.3s
&
&
0.3s
0.3s
again.
booting up.
Содержание StreamEnjin
