19
MAC
MAC
11.10 How to use ArcSoft™ VideoImpression™ 1.5
Lets make a video!
Follow these basic steps to make your first video.
Step 1 Click on new Icon.
Step 2 Using the selector button select video templates.
Step 3 Double click on the Static.avi screen in the video template selection and a copy will appear in the first large frame
on the storyboard on the bottom.
Step 4 Double click on the small frame directly right of the large frame. A new template will appear at the top called
"special effects" Double click on the "1. Fire" special effect which will now drop into the special effect frame you
highlighted.
Step 5 Double click on the next right large frame and repeat step 3 using a video template and double click template 5.
Countdown.avi. Repeat step 4.
Adding an existing video.
Step 6 To add a video you have already made double click on the next large frame in the story board to the right. Click
on the "Get" icon and select a video you had made and filed in the folder called "album" click on Get, with the
selector click on the down arrow and select desktop and then double click on "Album" folder and select a file
ending with mov (video file) the video will appear in the video templates. Double click on the video and it will
appear just like other video templates in the storyboard. Now go to step 10.
Alternatively you can produce a live video.
Ensure your
Stylus 1800
is connected to the computer via the USB cable. Click on the capture icon.
Step 7 And press the record icon. Wait for the video link to go live and now you're recording, press the ESC key on
your keyboard to end the video.
Step 8 Press the "Save" icon and name your file, and then press "save". Video impression will ask you where you want to
place your video. Select "video template".
Step 9 Select the "album" icon and your video clip you have just produced will appear in the video templates. Double
click on your video, your video will now drop into the storyboard.
Running the video.
Step 10 Select the "play movie" icon which will assemble your video together. Press the play icon to watch
your completed video. Watch to see how the special effects merge between the frames on the story board. Now
you try to make your own and also try the audio template.
11.11 How to use CU-SeeMe™
Warning! Using CU-SeeMe™ will erase all images stored in your
Stylus 1800
. Make sure you upload all wanted images before
using CU-SeeMe™.
1. Connect your
Stylus 1800
to the USB cable on one end.
2. Connect your USB cable to an available USB port on your Mac on the other end.
3. Put your
Stylus 1800
next to your Mac monitor or another flat surface.
4. Connect your microphone (not included) to your audio card's external microphone connector.
5. Double click the “CU-SeeMe™” icon from the CU-SeeMe™ folder.
6. Go to "Edit" and then "Preference". Edit your settings, e.g. video title, connection settings, etc.
7. Go to "Conference" and click "Connect". Type in the Hostname and IP address for the person you want to call and
press "Connect".
8. To find your own IP address, go to "Control Panel" and then "File Sharing". You will be able to see your IP address
under the "Start/Stop" partition.
9. For further help on how to use CU-SeeMe™, you can visit the following website: http://www.cuseeme.com
Storyboard
Static.avi
Countdown.avi
1. Fire
1. Fire
