Cool Energy inverTech CE-iVT18, Инструкция по установке и эксплуатации

Страница: 35 / 37

Page | 35
Cool Energy inverTech Manual v6.6 2020 ©
This Commissioning Checklist is to be completed in full by the competent person who commissioned the heat pump and associated
equipment as a means of demonstrating compliance with the appropriate Building Regulations and then handed to the customer to keep for
future reference.
Failure to install and commission this equipment to the manufacturer
’s instructions may invalidate the warranty but does not affect statutory rights.
Customer name: Telephone number:
Address:
Heat Pump Make and Model
Heat Pump Serial Number
Commissioned by (PRINT NAME): Certified Operative Reg. No. [1]
Company name: Telephone number:
Company address:
Commissioning date:
Building Regulations Notification Number (if applicable) [2]
CONTROLS - SYSTEM AND HEAT PUMP (tick the appropriate boxes)
Room thermostat and programmer/timer
Time and temperature control to heating
Load/weather compensation
Programmable Roomstat
Optimum start control
Time and temperature control to hot water Cylinder thermostat and programmer/timer Combined with Heat pump main controls
Heating zone valves (including underfloor loops) Fitted Not required
Hot water zone valves Fitted Not required
Thermostatic radiator valves Fitted Not required
Heat Pump Safety Interlock [3] Built In Provided
Outdoor Sensor Fitted Not required
Automatic bypass to system Fitted Not required
Buffer Vessel Fitted Yes No If YES Volume: Litres
ALL SYSTEMS
The heating system has been filled and pressure tested Yes
Expansion vessel for heating is sized, fitted & charged in accordance with manufacturer
’s instructions
Yes
The heat pump is fitted on a solid/stable surface capable of taking its weight Yes
The system has been flushed and cleaned in accordance with BS7593 and heat pump manufacturer
’s instructions
Yes
What system cleaner was used?
What inhibitor was used? Quantity litres
Is the system adequately frost protected? Yes
OUTDOOR UNIT
Are all external pipeworks insulated? Yes
Is the fan free from obstacles and operational? Yes
Has suitable consideration been made for waste water discharge? Yes
CENTRAL HEATING MODE
Heating Flow Temperature °C Heating Return Temperature °C
DOMESTIC HOT WATER MODE Measure and Record:
Is the heat pump connected to a hot water cylinder? Unvented Vented Thermal Store Not Connected
Hot water has been checked at all outlets Yes Have Thermostatic Blending Valves been fitted? Yes Not required
ADDITIONAL SYSTEM INFORMATON
Additional heat sources connected: Gas Boiler Oil Boiler Electric Heater Solar Thermal Other:
ALL INSTALLATIONS
The heating, hot water and ventilation systems complies with the appropriate Building Regulations Yes
All electrical work complies with the appropriate Regulations Yes
The heat pump and associated products have been installed and commissioned in accordance with the manufacturer
’s instructions
Yes
The operation of the heat pump and system controls have been demonstrated to the customer Yes
The manufacturer
’s literature, including Benchmark Checklist and Service Record, has been explained and left with the customer
Yes
Commissioning Engineer
’s Signature
Customer
’s Signature
(To confirm satisfactory demonstration and receipt of manufacturer
’s literature)
Notes: [1] Installers should be members of an appropriate Competent Persons Scheme. [2] All installations in England and
Wales must be notified to Local Area Building Control (LABC) either directly or through a Competent Persons Scheme. A
Building Regulations Compliance Certificate will then be issued to the customer. [3] May be required for systems covered
by G3 Regulations
© Heating and Hot Water Industry Council (HHIC)
www.centralheating.co.uk