Cookworks 3 BOWL STEAMER, Инструкция по эксплуатации

Страница: 15 / 16

Before Switching on make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate.
This appliance may be fitted with a non-rewireable plug. If it is necessary to
change the fuse in a non-rewireable plug the fuse cover must be refitted. If the
fuse cover is lost or damaged, the plug must not be used until a replacement is
obtained.
It is important that the color of the replacement fuse cover corresponds with the
colour marking on the base of the plug.
If the plug has to be changed because it is not suitable for your socket, or
becomes damaged, it should be cut off and an appropriate plug fitted following
the wiring instructions below.
The plug removed must be disposed of safely as insertion into a 13A socket is
likely to cause an electrical hazard.
For your own safety read the following instructions carefully before attempting to
connect this unit to mains.
The wires in this mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL BROWN = LIVE GREEN + YELLOW = EARTH
IMPORTANT
As the colours of the wire in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as following: -
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red.
The wire which is colour green + yellow must be connected to the terminal which
is marked with the letter E.
If a 13 Amps (BS 1363) plug is used, it must be fitted with a 13 Amp Fuse
conforming to BS1362 and be ASTA approved. If in doubt consult a qualified
electrician who will be pleased to do this for you.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No
user serviceable parts inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Suppiy:230 Volts/50Hz-AC only
Connecting it to other power source may damage the unit.