Converteam 700.002 735, Руководство по эксплуатации

Страница: 35 / 38

7 Appendix
Ethernet Option Board /
700.002 735 AE01
7-1
7 Appendix
Process Data OUT (Slave to Master)
The Fieldbus Master can read the frequency converter’s actual values using process data variables.
Basic, Standard, Local/Remote Control, Multi-Step Speed Control, PID control and Pump and Fan Control
applications use process data as follows:
ID Data Value Unit Scale
2104 Process data OUT 1 Output Frequency Hz 0,01 Hz
2105 Process data OUT 2 Motor Speed rpm 1 rpm
2106 Process data OUT 3 Motor Current A 0,1 A
2107 Process data OUT 4 Motor Torque % 0,1 %
2108 Process data OUT 5 Motor Power % 0,1 %
2109 Process data OUT 6 Motor Voltage V 0,1 V
2110 Process data OUT 7 DC link voltage V 1 V
2111 Process data OUT 8 Active Fault Code - -
Table 7-1: Process data OUT variables
The Multipurpose Control application has a selector parameter for every Process Data. The monitoring values
and drive parameters can be selected using the ID number (see LV7000 All in One Application Manual,
Tables for monitoring values and parameters). Default selections are as in the table above.
Process Data IN (Master to Slave)
Control Word, Reference and Process Data are used with all in One application as follows.
Basic, Standard, Local/Remote Control and Multi-Step Speed Control applications
ID Data Value Unit Scale
2003 Reference Speed Reference % 0.01%
2001 Control Word Start/Stop Command
Fault reset Command - -
2004–2011 PD1 – PD8 Not used - -
Table 7-2: Process Data In (1)
Multipurpose Control application
ID Data Value Unit Scale
2003 Reference Speed Reference % 0.01%
2001 Control Word Start/Stop Command
Fault reset Command - -
2004 Process Data IN1 Torque Reference % 0.1%
2005 Process Data IN2 Free Analogue INPUT % 0.01%
2006–2011 PD3 – PD8 Not Used - -
Table 7-3:Process Data In (2)