CONVECTAIR CALYPSO 7826, Инструкция по установке и эксплуатации

Страница: 5 / 27

5
Specifications
Location Recommendations
Model Voltage
Regulated
Power
Maximum
Power
Width
(mm)
Height
(mm)
Depth
(mm)
Weight
(kg)
7826-C20 240 V 1000 W 2000 W
308
(12 1/8 " )
410
(16 1/8")
143
( 5 5/8")
4.6
(8.8 lb)
Your new CALYPSO is a fan-forced heater with two power outputs: 1000 W to maintain the
room at a set temperature and a 2000 W Heat Boost for accelerated heating with a timer
that can be set from 5 to 120 minutes.
Small in size and designed to heat the room discreetly while maintaining a constant
temperature, it is ideal for bathrooms or other rooms with intermittent use.
PLEASE READ CAREFULLY: These instructions are essential for the safe installation
and use of your CALYPSO.
- The installation must comply with the national and local standards in place and
CONVECTAIR recommends that it be performed by a qualified electrician.
- Your appliance must be installed in such manner that switches and other control
devices cannot be touched by a person in the bathtub or in the shower. Do not install
over a bath or any other container of water.
- Do not install behind a door, cabinet or box, or in front of an air extractor. Keep
combustible fabrics, such as curtains, away from heaters.
- Avoid positioning under a window sill, behind curtains, doors, or under an
air extractor.
- Your appliance has a heating element which gets very hot. Do not install or use in the
presence of gasoline, paint, or near flammable products.
- The heater must not be installed under a power outlet.