CONVECTAIR CALYPSO 7826, Инструкция по установке и эксплуатации

Страница: 11 / 27

11
4.6. HEAT BOOST OPERATION
4.6.1. CUSTOMIZATION OF DURATION
After starting forced operation, a long press on the dial
MANUEL
MANUEL
MANUEL
Auto
(3 seconds) allows you to
customize the operating time of Heat Boost by intervals of 1 minute.
A long press on the dial
MANUEL
MANUEL
MANUEL
Auto
(3 seconds) will save the customization for future use.
When the Heat Boost is operating, the heater power is at its maximum (2000 W).
A short push on the dial
MANUEL
MANUEL
MANUEL
Auto
immediately starts Heat Boost.
Turning the dial
MANUEL
MANUEL
MANUEL
Auto
increases or decreases the duration of the Heat Boost according to
the preset intervals.
The preset intervals are: 15 minutes
30 minutes
1 hour
2 hours
4.6.2. STOPPING HEAT BOOST
A short press on the dial
MANUEL
MANUEL
MANUEL
Auto
stops Heat Boost operation.
Putting the device into standby using the
MANUEL
MANUEL
MANUEL
Auto
Power On/Standby button stops Heat
Boost operation.
4.5. MANUAL OPERATION, “MANUAL” BUTTON
Comfort mode (for adjusting the desired temperature)
Eco mode (recommended for short-term absences)
Frost Protection mode (recommended for absences greater
than 24 hours)
The automatic functions are disabled (scheduled programs), and the device can be set in
one of the following modes:
Pressing the
MANUEL
MANUEL
MANUEL
Auto
button overrides automatic operation of the device.