CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
11
(6)
Display Configuration
Pressure & Temperature Units (Default = English)
Performance Display (Default = Off)
(7)
CAN Configuration
Engine Manufacturer (Default = John Deere)
TSC 1 Address (Default = 3)
Source Address (Default = 44)
Engine Address (Default = 0)
Fuel Level Transmit (Default = On)
Voltage Transmit (Default = On)
Hours Transmit (Default = On)
Engine Status Transmit (Default = Off)
Panel Status Transmit (Default = Off)
Panel Information Transmit (Default = Off)
Fault Transmit (Default = All)
Engine ID Auto Requirement (Default = No)
CAN Bus Monitor (Default =Off)
Text During Sleep (Default = Off)
Panel Requests (Default = On)
(8)
Maintenance Configuration
Service Messages (Default = No)
Schedule Selection A, B, or C
Schedule Reset (Default = No)
Schedule Interval (Default = 1000 Hrs.)
Schedule Warning (Default = 10 Hrs.)
Schedule Trip (Default = 0 Hrs.)
Schedule Message (Custom)
(9)
Emissions Configuration
Allow Service Regen (Default = No)
Electronic Interlock Required (Default = No)
Regen Interlock (Default = Off)
TSC Transmit (Default = On)
DPF Inhibit Lamp Source (Default = Operator)
