XW-112™ Wi-Fi Water Detector Users Manual
Web Server
3.5 Water Sensor Tab
This page determines what actions are taken when a water alarm occurs.
Description
This text is used to describe the function of the XW-112. The text appears on the
Control Page
, and in
email messages when email alerts are enabled. This field may be up to 40 characters long. Enter a
descriptive name such as “
Laundry Room Water Sensor.
”
Control Page Refresh Rate
This value specifies the time interval in seconds that the Control Page will be refreshed.
Email Alert
Simple email messages can be sent in response to changes in the water alarm. This setting is used to
specify what conditions, if any, will cause email messages to be sent.
•
Off:
No email messages will be sent due to a water alarm.
•
On:
Email notifications will be sent when the water alarm changes from dry-to-wet or wet-to-dry.
Up to three email addresses can be assigned. The same message is sent to each email address. For
email notification to work, the XW-112 must have a properly configured network connection and a SMTP
server must be defined.
Remote Relay Options
The water alarm can be configured to control the relay contacts of another ControlByWeb™ device
(such as WebRelay™) at a remote location. The ‘Remote Relay Options’ setting is used to specify if and
how the control commands are sent.
•
No remote relay control –
No remote commands are sent due to alarm changes
•
Remote command equals sensor –
The remote relay turns off when the sensor is wet and
turns on when the sensor is dry
Xytronix Research & Design, Inc.
Page 21
Содержание XW-112
Страница 1: ......
