Web Server
XW-112™ Wi-Fi Water Detector Users Manual
•
Remote command opposite of sensor –
The remote relay turns on when the sensor is wet
and turns off when the sensor is dry
•
Send On command when dry (no off command) –
The remote relay latches on when the
sensor becomes dry.
•
Send On command when wet (no off command) -
The remote relay latches on when the
sensor becomes wet.
•
Send Off command when dry (no on command) –
The remote relay latches off when the
sensor becomes dry.
•
Send Off command when wet (no on command) –
The remote relay latches off when the
sensor becomes wet.
•
Send pulse command when dry –
The remote relay is pulsed when the sensor becomes dry.
•
Send pulse command when wet –
The remote relay is pulsed when the sensor becomes wet.
•
Send pulse command when sensor changes –
The remote relay is pulsed when the sensor
changes state.
•
Send toggle command when dry –
The remote relay changes state when the sensor becomes
dry. When the sensor becomes wet, no command is sent.
•
Send toggle command when wet –
The remote relay changes state when the sensor becomes
wet. When the sensor becomes dry, no command is sent.
•
Send toggle command when sensor changes –
The remote relay changes to the state
opposite of its current state when the sensor changes state.
Hostname / IP Address
Enter the IP address or Host Name of the device on which the remote relay is located. To save energy,
DNS lookups are only performed the first time after the settings are submitted, or after a failure to send a
remote relay command.
TCP Port
Specify the TCP Port. By default this is set to port 80.
Page 22
Xytronix Research & Design, Inc.
Содержание XW-112
Страница 1: ......
