Control Techniques UD70, Руководство пользователя

Страница: 113 / 154

UD70
Issue code: 70nu2
Features 8-15
_
Q31% Bit mapped indication parameter
All bits of
_
Q31% are read-only bits controlled by the operating
system. The remaining bits without descriptions are reserved for
future use. A value of 0 in any bit shows that each statement is false.
_
Q31% is reset to 0 when
_
Q32%.17 is set to 1.
_
Q31%.1 The position loop following error has exceeded the value in
_
Q37%.
_
Q31%.9 The slave is recovering the position lost during acceleration.
_
Q31%.10 Position profile in progress. The axis has not yet reached the target
set-point..
_
Q31%.11 Position offset in progress. The axis offset position has not yet been
reached.
_
Q31%.12 The axis is fully locked to the master reference from the auxiliary
encoder input.
_
Q32% Bit mapped control parameter
All bits of
_
Q32% are read-write bits. They act as switches to select
between the various functions available. (See logic diagrams.) The
remaining bits without descriptions are reserved for future use.
_
Q32%.1 Selects the direction of the digital lock. This allows the axis to be
locked to the master in speed or position, but running in either
direction.
0 same direction.
1 opposite direction.
_
Q32%.2 Selects the digital lock output as the position reference. This
parameter is used in conjunction with
_
Q32%.3 and
_
Q32%.4.
0 see
_
Q32%.3.
1 select digital lock position reference.
_
Q32%.3 Selects between the target position reference
_
Q2%, and the
position reference derived from the slave speed reference
_
Q3%.
This parameter is used in conjunction with
_
Q32%.2 and
_
Q32%.4.
0 target position reference
_
Q2%.
1 slave speed reference,
_
Q3%.
_
Q32%.4 Selects the cam table output as the position reference. The cam
function can only be used if the cam table has been correctly
initialised. This parameter used in conjunction with
_
Q32%.2 and
_
Q32%.3.
0 see
_
Q32%.2 and
_
Q32%.3.
1 select the cam table position reference.