UD52 User Guide
Issue code: 52nu3
21
16.07
Simulated-encoder output scaling
ô
0 ~ 15
ð
0
2
n
RW Uni
Enter the required value in
16.07
for scaling the simulated-encoder output.
The scaling factor is as follows:
1
2
16 07
[
.
]
16.08
Simulated encoder– F/D output
enable
ô
0 ~ 1
ð
0
RW Bit
Use
16.08
to select the output mode of terminals 50, 51, 53, 54, as follows:
16.08 Output mode
0 A/B quadrature signals
1 Frequency and direction signals
16.09
S
IN
-
COS
encoder– phase offset
ô
0 ~ 6143
ð
1/6143 rev. RW Uni S P
16.09
indicates the value of phase offset. See
Phase offset
in Chapter 5
Setting up the UD52
for ways in which the value is entered.
The value is saved at power-down and is changed only when one of the
procedures in
Phase offset
is performed.
When the operating mode of the Drive is changed,
16.09
is reset to zero.
Restoring default values does not affect the value of
16.09
.
16.10
S
IN
-
COS
encoder phasing test
ô
0 ~ 1
ð
0
RW Bit
Set
16.10
at
1
to initiate the encoder phasing test (on completion,
16.10
automatically returns to 0). See
Phase offset
in Chapter 5
Setting up the
UD52
.
Содержание UD52
