Dinverter
A
User Guide
Issue code: d2au9
4
2
Safety Information
2.1
Warnings, Cautions and Notes
A
Warning
contains information which is essential for avoiding a safety
hazard.
A
Caution
contains information which is necessary for avoiding a risk of
damage to the product or other equipment.
A
Note
contains information which helps to ensure correct operation of the
product.
2.2
Electrical safety – general warning
The voltages used in the Drive can cause severe electric shock and/or burns,
and could be lethal. Extreme care is necessary at all times when working
with or adjacent to the Drive.
Specific warnings are given at the beginning of the installation instructions
in this User Guide.
The installation must comply with all relevant safety legislation in the
country of use.
2.3 System
design
The Drive is intended as a component for professional incorporation into
complete equipment or systems. If installed incorrectly the Drive may
present a safety hazard. The Drive uses high voltages and currents, carries
a high level of stored electrical energy, and is used to control mechanical
equipment which can cause injury.
Close attention is required to the electrical installation and the system-
design to avoid hazards either in normal operation or in the event of
equipment malfunction. System-design, installation, commissioning and
maintenance must be carried out by personnel who have the necessary
training and experience. They must read this safety information and this
User Guide carefully.
To ensure mechanical safety, additional safety devices such as
electro-mechanical interlocks may be required. The Drive must not be used
in a safety-critical application without additional protection.
2.4 Environmental
limits
The instructions in this User Guide regarding transport, storage, installation
and use of Drives must be complied with, including the specified
environmental limits. Drives must not be subjected to excessive physical
force.
