Commander SE User Guide
Issue Number 5
General Information
The manufacturer accepts no liability for any consequences resulting from
inappropriate, negligent or incorrect installation or adjustment of the optional
operating parameters of the equipment or from mismatching the variable speed
drive (Drive) with the motor.
The contents of this User Guide are believed to be correct at the time of printing.
In the interests of a commitment to a policy of continuous development and
improvement, the manufacturer reserves the right to change the specification of
the product or its performance, or the contents of the User Guide, without notice.
All rights reserved. No parts of this User Guide may be reproduced or transmitted
in any form or by any means, electrical or mechanical including photocopying,
recording or by an information storage or retrieval system, without permission in
writing from the publisher.
Drive software version
This product is supplied with the latest version of user-interface and machine
control software. If this product is to be used in a new or existing system with other
Commander SE Drives, there may be some differences between their software
and the software in this product. These differences may cause this product to
function differently. This may also apply to Drives returned from a Control
Techniques Service Centre.
If there is any doubt, contact a Control Techniques Drive Centre.
Copyright
© August 2000 Control Techniques Drives Limited
Issue Code:
5
Software:
V01.08.00 onwards
IMPORTANT
WARNING
