3
Connect to the Network and Power
1
Plug the Ethernet cable from the home network connection into
the HDMI switch’s
IP
control port.
2
Connect the included power adapter into the switch’s power
connector. When the power adapter is connected, the HDMI
switch powers on.
Set Up the Connections
Use Composer Pro to set up the bindings. See the
Composer Pro User
Guide
for details, or refer to the
Documentation
tab in the device driver.
NOTE:
A zone must be locked to enable 3D features and
multi-channel audio (including lossless formats).
Using the HDBaseT Receiver
Indicators
HDCP video (solid=HDCP-protected
video passing through, flashing=un-
protected video, off=no video)
HDBaseT link (solid=active,
steady flash=power saving,
random flickering/off=error)
Power (slow blink=power on)
HDBaseT Receiver
HDMI (output)
LAN (pass-through)
RS232
IR (pass-through)
Source Device
(example: controller)
Network Switch
