W415-2344 / A / 11.12.19
EN
14
fi nishing
3.5 log
placement
PHAZER
TM
logs and glowing embers exclusive to Continental, provide a unique and realistic glowing effect that is
different in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect.
Log colours
may vary. During the initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
!
WARNING
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
A.
Place the back log (#1)
onto the log support
tray and in front of the
tabs. The tabs maintain
an air space between
the log and fi rebox back
to facilitate combustion
air fl ow. Ensure that the
back of the log rests
against the brackets
on the back wall of the
fi rebox.
D.
Position the base end of
the center log (#5)against
the middle grate post with
the other end of the log
resting in the pocket of the
left crossover log.
B.
Move the two small logs
(#2 & #3) into position,
lining up the studs
located on the burner
with the holes on the
bottom of the logs.
Ensure that the small
logs sit fl at on the burner.
E.
Place the bottom of the
right crossover log (#6)
against the right fi rebox
side and pulled forward
to the grate. The top of
the log should rest in
the pocket provided on
the center log (#5).
C.
Place the bottom of the
left crossover log (#4)
against the left fi rebox
side and pulled forward
to the grate. The top of
the log should rest in the
pocket on the back log.
