Continental Fireplaces CDCS600-P, Инструкция по установке и эксплуатации, Страница: 23 / 24

23
W415-0162 / E / 03.05.04
Main burner goes out;
pilot goes out.
REFER TO "MAIN BURNER GOES OUT; PILOT STAYS ON"
Thermocouple shorting or
Vent re-circulating
(MODEL CDVS600 ONLY)
- check joint seals and installation.
- loosen and tighten thermocouple
- clean thermocouple and valve connection.
- replace thermocouple.
- replace valve.
Exhaust fumes
s m e l l e d i n r o o m ,
headaches.
- check all seals.
Fireplace is spilling.
Carbon is being de-
posited on glass, logs
or combustion cham-
ber surfaces.
Flame is impinging on the
logs or combustion chamber. - check that the logs are correctly positioned.
- open air shutter to increase the primary air.
- check the input rate: check the manifold pressure and orifice
size as specified by the rating plate values.
- check that the door gasketing is not broken or missing and
that the seal is tight.
- check that both vent liners are free of holes and well sealed at
all joints.
- check that minimum rise per foot has been adhered to for any
horizontal venting.
A i r s h u t t e r h a s b e c o m e
blocked
- ensure air shutter opening is free of lint or other obstruc-
tions.
F l a m e s a r e v e r y
aggressive.
(CDVS600
REAR VENT VERTI-
CAL TERMINATION)
Venting action is too great.
- tighten door clamps
- restrict vent exit with restrictor vent kit, GDSRP-KT.
Door is ajar
MODEL CDVS600
ONLY:
Main burner flame is
a blue, lazy, transpar-
ent flame.
Blockage in vent. - remove blockage. In really cold conditions, ice buildup may
occur on the terminal and should be removed as required.
- refer to Figure 27 to ensure correct location of storm collars.
Incorrect installation (vertical
termination only).
White / grey film forms.
Sulphur from fuel is being de-
posited on glass, logs or com-
bustion chamber surfaces.
- clean the glass with a recommended gas fireplace glass
cleaner. DO NOT CLEAN GLASS WHEN HOT.
If deposits are not cleaned off regularly, the glass may be-
come permanently marked.
SYMPTOM PROBLEM TEST SOLUTION