Continental Fireplaces BCNV40-N, Инструкция по установке и обслуживанию

Страница: 13 / 36

13
W415-0814 / A / 03.17.11
5.2.4 FACING
5.2.5 FINISHING
Combustible materials may be installed fl ush with the
front of the appliance but must not cover any of the black
face-areas of the appliance. Non-combustible material
(brick, stone or ceramic tile) may protrude in these areas.
It is not necessary to install a hearth extension with this
appliance.
When roughing in the appliance, raise the appliance
to accommodate for the thickness of the fi nished fl oor
materials, (tile, carpeting, hard wood) which if not planned
for will interfere with the opening of the lower access door
and the installation of many decorative fl ashing acces-
sories.
Objects placed in front of the appliance should be kept a
minimum of 48" away from the glass front face.
DRYWALL
DRYWALL
4" MIN
Refer to "FINISHING" section for complete instructions regarding log placement, glass door and upper and
lower louvre attachments.
5.3 OPEN-END
It is best to frame your appliance after it is positioned and
the vent system is installed. Use 2x4's and frame to local
building codes.
NOTE: The one side stud must be steel.
LEFT CORNER Appliance ILLUSTRATED
To install the appliance face fl ush with the fi nished
wall, position the framework to accommodate the
thickness of the fi nished wall.
A = 25 1/8" minus fi nishing material thickness each side.
A
38 1/4"
THE UNIT IS
NOT LOAD
BEARING
38 1/4"
6 1/2"
2 1/2"
5.3.1 INSTALLATION