Continental Fireplaces BCNV40-N, Инструкция по установке и обслуживанию

Страница: 15 / 36

15
W415-0814 / A / 03.17.11
5.4 SEE-THRU
It is best to frame your appliance after it is positioned and the
vent system is installed. Use 2x4's and frame to local building
codes.
See "BAR TYPE / COUNTER TOP INSTALLATION" section.
A = 22 1/8" minus fi nishing material thickness, each side.
A
38 1/4"
40 1/2"
6 1/2"
2 1/2"
Install the base panels as illustrated in steps 1-4, see "PEN-
INSULA INSTALLATION PROCEDURE" section. Both side
panels sit under the bracket tab. Holding the side panel in
position, bend down the tab to secure.
DETAIL 6.
RETAINER
RETAINER
STEP 5
STEP 6
DETAIL 5 & 6
Combustible materials may be installed fl ush with the front of the appliance but must not cover any of the
black face-areas of the appliance. Non-combustible material (brick, stone or ceramic tile) may protrude in
these areas.
It is not necessary to install a hearth extension with this appliance system.
When roughing in the appliance, raise the appliance to accommodate for the thickness of the fi nished fl oor
materials, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower ac-
cess door and the installation of many decorative fl ashing accessories.
Objects placed in front of the appliance should be kept a minimum of 48" away from the glass front faces.
5.4.1 INSTALLATION
5.4.2 BRICK PANEL INSTALLATION
5.4.3 FACING