Continental Access CADV-H-XP08, Руководство пользователя

Страница: 106 / 131

Digital Video Recorder
93
Highlight the box beside
Min. Blocks
and press the button. You will be able to set the
number of sensor blocks that must be activated. Setting the Min Blocks will only be available if
Motion Search is selected.
Once you set your desired search conditions, highlight
Search
and press the button to
display the search results in the
Motion Search
screen. Selecting
Cancel
exits the screen
without saving the changes.
When you search for motion events of another camera, you will be asked whether or not you
want to delete the previous search results from the list.
Clip-Copy Screen
The
Clip-Copy screen can be used to copy video clips to an internal CD-RW or DVD RW drive,
or external USB hard disk, CD-RW or flash drive. The copied video clips can be viewed on
computers running Microsoft Windows 98, ME, 2000 or XP. Refer to the
Appendix A — USB
Hard Disk Drive Preparation for information on preparing the external drive for clip copy. The
clip copy can be simply done by pressing the
MENU
button or the
FREEZE
button.
Press and hold the
MENU
button for more than two seconds while in the Search mode, and the
Clip-Copy
screen appears to allow clip copy setup.
Pressing the
FREEZE
button during the playback will set the starting point of the video to be
clip copied, and the icon displays at the bottom-left corner of the screen. Pressing the
FREEZE
button again will set the ending point of the video to be clip copied by displaying the
Clip-Copy screen.
Pressing and holding the
FREEZE
button for more than two seconds while in the Search mode
or Live Monitoring mode initiates the One-Touch Clip Copy function. The last recorded image
will be the ending point of video to be clip copied, and the system will automatically begin to
calculate the possible video data size that the selected storage media can handle.
Figure 119 — Clip-Copy screen.