Installation
11
Connect USB cable to PC
Connect the USB interface cable to the PC
1. On the PC, verify that WIDEsystem is running – the WIDEsystem icon should be visible in
your system tray.
2. If WIDEsystem is not running, locate the WIDEsystem entry under your
Programs
menu
and start it manually.
3. Make sure the USB cable is connected to the scanner as instructed in a previous step.
4. Connect the A-connector end (flat end) to a USB port on your computer.
NOTE
: It is recommended to use an available USB port on the
back
of the PC. Using USB
ports on the front can affect performance on some PC models.
Scanner installation
The Installation Wizard starts up
1. The driver will detect the scanner and start the scanner installation wizard.
2. On first time installations, the WIDEsystem Scanner Installation Wizard should start after 20
seconds.
3. If the installation wizard does not start up, perform one or more of the following:
a. Unplug and reinsert the USB connections to scanner and PC.
b. Ensure the USB cable is connected firmly at both ends.
c. Try a different USB port on the PC.
d. Make sure the USB is inserted into the port marked for USB at the back of the
scanner (and not, for example, the Ethernet port).
11
10
Содержание HD iFLEX
Страница 1: ...User s Guide HD iFLEX Scanner...
