Installation
10
Power ON the scanner
Turn ON scanner power
Turn on the main power switch at the back of the scanner
Connect Cables
Connect the USB interface cable to the scanner
Initial installation and activation of the scanner is easiest using the USB
connection.
This applies also for Gigabit enabled models.
1. The interface-connection-panel is found at the back of the scanner – on its left side
when facing the back.
2. Connect the B-connector end (square shaped) end to a USB port on the scanner.
NOTE: For Gigabit enabled scanner models:
The installation wizard will instruct
you on installation and activation of the gigabit interface
later
in the installation process.
For now – only connect the USB.
Regulatory Notice:
Your scanner product has been tested to comply with the EMC Standards
EN55022 and FCC, Part 15. To maintain compliance, only use the interface cables supplied with the
scanner.
IMPORTANT:
Do not yet connect the other end of the USB to the PC.
9
8
Содержание HD iFLEX
Страница 1: ...User s Guide HD iFLEX Scanner...
