English
FLAG25i
- 5 x 5 LEDs moving panel with artnet and infinity move
Page 7
7 - Menus
This menu allows you to change the initial DMX address, visualise the channels DMX values and select an operating mode.
The FLAG25i features many menus allowing you to configure its every move and function.
Press
MODE
to access the main menu.
Use the navigation keys to browse through submenus. Then press
ENTER
to access a submenu.
Use the
and
navigation keys to change values.
Press
ENTER
to save changes.
Press
MODE
again to leave a submenu.
Notes:
• Values in bold are the default values.
• In order to access menus when the moving head is turned off (thanks to the internal battery), press DC Switch and hold for
more than 2 seconds. If the buttons are not used and remain inactive for 1 minute, the display will automatically turn off.
• When browsing through menus, values in blue are values currently in use. When entering a new value, it will be written in
red until you save changes by pressing
ENTER
.
7.1 FUNCTION
Submenus
Lower menus
Values
Description
Address
Set Address
From
A001
to AXXX
Assigns a DMX address.
The moving head automatically activates the DMX
mode once the DMX address has been configured.
Slave Set
Slave 1
, Slave 2, Slave 3
Allows you to determine how the moving head will
react when the slave mode is activated.
Program
Auto
Alone
, Master
Once the Automatic mode is activated, the moving
head can operate by itself or as a Master unit.
Sound
Alone
, Master
Once the Music-sensitive mode is activated, the
moving head can operate by itself (Alone) or as a
Master unit (Master).
